Cinch Gaming Controllers Get Enhanced Grip

Cinch Gaming, a national leader in custom professional video game controllers, was looking for a durable solution to provide a rubber grip coating to their ABS plastic controller shells.

Challenge

Find a material that provided a less sticky, more textured, grabby surface for gaming controllers.

Over-the-counter rubber and adhesive products didn't sufficiently bond to ABS materials enough to provide both a durable and tactile solution. Because gamers can use game controllers for extended periods of time, Cinch needed a product that could not only withstand extended use, but provide a comfortable and tactile grip experience as well. Our Dymax Application Engineers recommended using a light-curable maskant to replace the current laser weld process.

Solution

The SpeedMask® resin had excellent adhesion to the controllers and provided the non-sticky, textured feel the customer needed. An SG-100-RH spray gun and a BlueWave LED Flood completed the system.

The Dymax Application Engineering team recommended several light-curable coatings that would provide a strong bond with ABS plastic materials. Ultimately, a SpeedMask® resin was selected as the coating of choice because it was able to provide good “grip” without being sticky. A Dymax SG-100-RH spray gun was selected to apply the coating. This resulted in additional benefits as it allowed for the coating to be dispensed in a type of splatter pattern that created a more secure grip-like texture that gamers prefer. A Dymax BlueWave® LED Flood System was selected to cure the coating because it could cure it in a matter of seconds without risking damage to the surface of the controller.

Results

The Dymax system solution enabled the customer to get a durable and tactile grip that is now being offered as an option on all Cinch controllers.

Dymax SpeedMask resins are not intended for applications involving direct or prolonged contact between the skin and the resin, and Dymax has not tested or evaluated its SpeedMask resins for such applications. Dymax does not warrant that its SpeedMask resins are suitable for such applications, and it is the purchaser's responsibility to test the suitability of any Dymax resin for the purchaser's specific application. Should a purchaser choose to use a Dymax resin in an application similar to the one described above, purchaser does so at its own risk, and Dymax will not be held liable for any claim, damage or injury that allegedly arose, whether directly or indirectly, from contact between a complainant's skin and a Dymax SpeedMask resin. Please refer to Dymax's General Terms & Conditions of Sale.

More Case Studies

We offer more than products, we offer solutions. See how Dymax is helping customers solve their most challenging applications in various markets.

View all

Adhesive Replaces 2-Part Epoxy for Faster Optical Sensor Assembly

A case study about how a light-curable adhesive replaced a two-part epoxy for faster sensor assembly and improved the application process. ...

Aerospace Improving PCB Conformal Coating Process

 A case study on improving the PCB conformal coating process by increasing production output.  ...

Aerospace Improving PCB Masking Process

A case study on improving the PCB masking process for an aerospace and defense manufacturer.  ...

Aerospace Masking Process for Electroless Nickel Plating

A case study on the masking process for electroless nickel plating ...

Aerospace Printed Circuit Board Assembly

Increasing Production and Reducing Processing Time in PCB Assembly  ...

Automated Masking System Revolutionizes Surface Treatment Processing

A case study about how an automated masking line drastically reduced the processing times required for an aero engine component. ...

Bonding MLAs in Automotive Headlights

Adhesive for Bonding MLAs in Automotive Headlights Exhibits Low Discoloration Under High Temperatures ...

Electrical Explosion Protection & Sensor Technology

A world leader in electrical explosion protection and sensor technology was looking to turn away from laser welding for an application that requires sealing two polycarbonates of their photoelectric ...

GenZe Electric Transportation Battery Pack Gasket

Using a form-in-place gasket to create a reliable battery assembly that meets strict design standards of weight, performance, and safety.  ...

High Performance Solutions for EV Charging Stations

A case study on how light-curable conformal coatings and encapsulants helped improve EV smart charging station infrastructure PCB applications. ...

Light-Curing Conveyor Enables 100% Manufacturing Scale Up

A case study on how using Dymax UVCS Light-Curing Conveyor Systems helped to increase the production of nasal swabs.VIDEO:  Dymax Partners with 3D Printer Company on COVID-19 Test Swabs #InThisTogeth...

One Part, Optical Epoxy Using UV/Visible Light and Heat Cure

A case study on using ultraviolet and heat cure to secure a camera module holder to a PCB. ...

Ruggedizing Lens and Reflector Housings in Flashlights

A leading manufacturer of premium portable lighting wanted to ruggedize its safety flashlights used in the field by firefighters, police officers, and military troops. In their search for a fast-curi...

Ultra-Red Fluorescing Technology Provides Immediate Quality Check

A case study on how the use of patented Ultra-Red® fluorescing technology can aid in product verification. ...

Get In Touch

Interested in learning more or have questions? We want to hear from you.

Back to top