A case study about how a light-curable adhesive replaced a two-part epoxy for faster sensor assembly and improved the application process. ...
Collage des AML dans les phares automobiles
Adhesive for Bonding MLAs in Automotive Headlights Exhibits Low Discoloration Under High Temperatures
Challenge
Bond Different Substrates of MLAs Together Quickly and Prevent Movement
A manufacturer was searching for an adhesive to bond Micro Lens Arrays (MLAs) to brackets that exhibited reliable performance and low discoloration in high-temperature environments found during automotive headlight operation. MLA headlights are connected to sensors with advanced technology that enable automatic adjustment of light intensity, angle, and on/off activation.
Since the assemblies were for MLA headlamps used in ADAS equipped vehicles, the company required a method to bond the different substrates of the components together quickly and provide good adhesion between them. The lenses also had to be secured in place for precise focusing and the material used needed to prevent their discoloration.
Proper alignment of the glass lenses to the metal brackets was important to ensure no movement occurred within the finished component. One small offset within the array could create unclear optics and throw off the functionality of the headlight completely, so lens alignment was critical. Low discoloration was also important at the high-temperature environments the lenses would need to operate under.
In addition, they were seeking a UV-only product rather than UV and heat solution.
Solution
Utilize an Adhesive that Could Withstand Varying Environmental Conditions and Maintain Optical Clarity
The Application Engineering team suggested its Dymax 3013-GEL general purpose UV/Visible light-curable adhesive for its ability to bond dissimilar substrates together and adhesion to withstand temperatures from 140℃ to -30℃. The product featured excellent moisture resistance to survive varying environments as well as blue fluorescence for post cure in-line quality control utilizing optical scanners for high-speed inspection. The adhesive’s lack of discoloration maintained the clear optics of the MLAs, an important attribute required in headlight applications.
With a nominal viscosity of 27,000 cP, the use of an auger valve and air pressure dispenser with large tip was proposed to ensure accurate, sufficient material dispense.
The team recommended using an LED spot at 365 nm wavelength to pre-cure the components, and an LED flood-curing system for full cure, enabling fast curing and maximum production speed for increased throughput.
Résultats
Expected Output of 48,000 Units Per Year and Greener Process
Dymax 3013-GEL not only exhibited good reliability and performance in challenging environments, but also showed very low discoloration during harsh thermal conditions. By utilizing light-curing technology and working in conjunction with the Dymax team, the manufacturer was able to start production on its MLA assemblies right away. The use of an adhesive with no solvents added and LED curing capability enabled the customer to have a "greener" process by reducing hazardous materials and generating less waste. The expected throughput is estimated to be over 48,000 headlight modules per year.
Produits annexes
Afin de créer une solution complète, consultez les autres produits Dymax fonctionnant en conjonction avec celui-ci.
Numéro du produit
Description du produit
Disponibilité géographique
Système avancé d'aide à la conduite (ADAS)
Collez, scellez et protégez les capteurs LiDAR et les caméras dans les systèmes avancés d'aide à la conduite. Adhésifs, joints formés sur place et agents d'encapsulation pour l'alignement actif et l'assemblage de modules de caméras.
Systèmes de polymérisation à fenêtre d'émission
Le système de lampe de projection de photopolymérisation LED/UV modulaire est composé d'une alimentation, d’un réflecteur et d’une ampoule standard à halogénure métallique de 400 watts (systèmes de lumière UV/visible). Des assemblages d’obturateurs, des supports, des protections contre la lumière et des ampoules de rechange sont disponibles pour créer un système de polymérisation personnalisé.
Afin de créer une solution complète, consultez les autres produits Dymax fonctionnant en conjonction avec celui-ci.
More Case Studies
We offer more than products, we offer solutions. See how Dymax is helping customers solve their most challenging applications in various markets.
Tout afficherCet adhésif remplace l'époxy à 2 composants pour un assemblage plus rapide des capteurs optiques.
Amélioration du procédé de revêtement conforme des PCB dans l'aérospatiale
A case study on improving the PCB conformal coating process by increasing production output. ...
Amélioration du procédé de masquage des PCB dans l'aérospatiale
A case study on improving the PCB masking process for an aerospace and defense manufacturer. ...
Procédé de masquage pour le nickelage chimique dans l'aérospatiale
A case study on the masking process for electroless nickel plating ...
Assemblage des circuits imprimés pour l'aérospatiale
Increasing Production and Reducing Processing Time in PCB Assembly ...
Un système de masquage automatisé révolutionne le traitement des surfaces
A case study about how an automated masking line drastically reduced the processing times required for an aero engine component. ...
Les manettes de jeu Cinch bénéficient d'une prise en main améliorée
Cinch Gaming, a national leader in custom professional video game controllers, was looking for a durable solution to provide a rubber grip coating to their ABS plastic controller shells. ...
Protection contre les explosions électriques et technologie des capteurs
A world leader in electrical explosion protection and sensor technology was looking to turn away from laser welding for an application that requires sealing two polycarbonates of their photoelectric ...
Joint de bloc de batterie pour le transport électrique de GenZe
Using a form-in-place gasket to create a reliable battery assembly that meets strict design standards of weight, performance, and safety. ...
Des solutions performantes pour les stations de recharge de véhicules électriques
A case study on how light-curable conformal coatings and encapsulants helped improve EV smart charging station infrastructure PCB applications. ...
Le convoyeur de photopolymérisation permet une augmentation de l'échelle de production de 100 %
A case study on how using Dymax UVCS Light-Curing Conveyor Systems helped to increase the production of nasal swabs.VIDEO: Dymax Partners with 3D Printer Company on COVID-19 Test Swabs #InThisTogeth...
Époxy optique à composant unique utilisant la lumière UV/visible et la thermopolymérisation
A case study on using ultraviolet and heat cure to secure a camera module holder to a PCB. ...
Renforcement des boîtiers d'objectifs et des réflecteurs des lampes de poche
A leading manufacturer of premium portable lighting wanted to ruggedize its safety flashlights used in the field by firefighters, police officers, and military troops. In their search for a fast-curi...
La technologie de fluorescence Ultra-Red permet un contrôle de qualité immédiat
A case study on how the use of patented Ultra-Red® fluorescing technology can aid in product verification. ...
Nous contacter
Vous souhaitez en savoir plus ou vous avez des questions ? Nous voulons connaître votre avis.